SD5902 Switch Controller
SD5902 Firmware - Version 2.1 (369 downloads)
SD5902 Firmware - Version 2.0 (486 downloads)
CP2021 Control Processor
CP2021 Firmware Version 1.6 (399 downloads)
CP2021 Firmware - Version 1.5 (651 downloads)
Series 624 System Attenuators
RS485 Series xx624 Firmware - Version 1.8 (363 downloads)
Power over Ethernet Series xx624 Firmware - Version 1.8 (599 downloads)
Power over Ethernet Series xx624 Firmware - Version 1.7 (595 downloads)
In order to upgrade the firmware on Power-over-Ethernet models one must first identify the device’s IP address. This can be achieved using the Lantronix DeviceInstaller program found on the Firmware page of the Lantronix website. Then run the downloaded executable file and enter the IP address when prompted. The update should take approximately 1 minute.